2:1 Halogen-Free Non-Flame Retardant Heat Shrink TubeReturn
The halogen-free non-flame-retardant heat shrink tubing is made of radiation-crosslinked polyolefin material, delivering excellent physical, chemical, and electrical properties.
Its main applications include wire harness protection, electrical insulation for connectors, anti-corrosion for solder joints, and mechanical protection.
This eco-friendly halogen-free product is widely used in automotive, electronics, consumer goods, decoration, and lighting industries."
Key Features:
Compliance Standard: CAN/CSA C22.2 NO198.1-99
Shrink Ratio: 2:1
Initial Shrink Temperature: ≥+85°C
Full Shrink Temperature: ≥125°C
Operating Temperature Range: -55°C to +125°C
Properties: Halogen-free, low smoke, non-toxic, flexible
Environmental Standards: RoHS, IPC/JEDEC-J-STD-709
Standard Colors: Black, red, green, blue, etc. (10 standard international colors)
Technical Parameters:
| Property | Test Method | Specification |
|---|---|---|
| Tensile Strength (MPa) | ASTM D 2671 | ≥10.4 |
| Elongation at Break (%) | ASTM D 2671 | ≥200 |
| Axial Change Rate (%) | ASTM D 2671 | -5~+5 |
| Withstand Voltage (600V) | UL224 | 2500V, 1min no breakdown |
| Volume Resistivity (Ω·cm) | IEC 60093 | ≥1×10¹⁴ |
Specification Table:
Size | Supplied Inner Diameter (mm) | Fully Shrunk (mm) | Standard Pack (m/roll) | Applicable Range (mm) | |
Inner Diameter | Wall Thickness | ||||
Φ1.0 | 1.50±0.20 | ≤0.60 | 0.36±0.06 | 400±3 | 0.80-0.90 |
Φ1.5 | 2.00±0.30 | ≤0.85 | 0.36±0.06 | 400±3 | 1.0-1.3 |
Φ2.0 | 2.50±0.30 | ≤1.0 | 0.40±0.08 | 400±3 | 1.1—1.8 |
Φ2.5 | 3.00±0.30 | ≤1.25 | 0.42±0.08 | 400±3 | 1.35—2.3 |
Φ3.0 | 3.50±0.30 | ≤1.50 | 0.44±0.08 | 400±3 | 1.6—2.7 |
Φ3.5 | 4.00±0.30 | ≤1.75 | 0.44±0.08 | 400±3 | 1.85—3.2 |
Φ4.0 | 4.50±0.30 | ≤2.00 | 0.48±0.10 | 400±3 | 2.1—3.6 |
Φ4.5 | 5.00±0.30 | ≤2.25 | 0.48±0.08 | 200±2 | 2.35—4.0 |
Φ5.0 | 5.50±0.40 | ≤2.50 | 0.49±0.08 | 200±2 | 2.6—4.5 |
Φ5.5 | 6.00±0.40 | ≤2.75 | 0.49±0.08 | 200±2 | 2.8—5.5 |
Φ6.0 | 6.50±0.40 | ≤3.00 | 0.54±0.08 | 200±2 | 3.1—5.4 |
Φ6.5 | 7.00±0.40 | ≤3.25 | 0.54±0.08 | 100±1 | 3.2—6.0 |
Φ7.0 | 7.50±0.40 | ≤3.50 | 0.56±0.08 | 100±1 | 3.7—6.3 |
Φ8.0 | 8.50±0.50 | ≤4.00 | 0.58±0.08 | 100±1 | 4.2—7.2 |
Φ9.0 | 9.50±0.50 | ≤4.50 | 0.58±0.08 | 100±1 | 4.7—8.0 |
Φ10.0 | 10.50±0.50 | ≤5.00 | 0.58±0.08 | 100±1 | 5.2—9.0 |
Φ11.0 | 11.50±0.50 | ≤5.50 | 0.58±0.08 | 100±1 | 5.7—10 |
Φ12.0 | 12.50±0.50 | ≤6.00 | 0.58±0.08 | 100±1 | 6.2—11 |
Φ13.0 | 13.50±0.50 | ≤6.50 | 0.60±0.10 | 100±1 | 6.7—12 |
Φ14.0 | 14.50±0.50 | ≤7.00 | 0.60±0.10 | 100±1 | 7.3—13 |
Φ15.0 | 15.50±0.50 | ≤7.50 | 0.70±0.10 | 100±1 | 7.8—14 |
Φ16.0 | 16.50±0.50 | ≤8.00 | 0.70±0.10 | 100±1 | 8.3—15 |
Φ17.0 | 17.50±0.50 | ≤8.50 | 0.70±0.10 | 100±1 | 8.8—16 |
Φ18.0 | 19.00±0.50 | ≤9.00 | 0.70±0.10 | 100±1 | 9.3—17 |
Φ20.0 | 21.00±0.50 | ≤10.00 | 0.70±0.10 | 100±1 | 10.4—19 |
Φ22.0 | 23.00±0.50 | ≤11.00 | 0.78±0.10 | 100±1 | 11.4—21 |
Φ25.0 | 26.00±0.50 | ≤12.50 | 0.86±0.10 | 50±0.5 | 12.8—24 |
Φ28.0 | 29.00±0.50 | ≤14.00 | 0.90±0.10 | 50±0.5 | 15—26 |
Φ30.0 | 31.00±0.50 | ≤15.00 | 0.90±0.15 | 50±0.5 | 16—29 |
Φ35.0 | 36.00±0.50 | ≤17.50 | 0.95±0.15 | 50±0.5 | 20—30 |
Φ40.0 | 41.00±0.50 | ≤20.00 | 1.00±0.15 | 50±0.5 | 21—35 |
Φ45.0 | 46.00±0.50 | ≤22.50 | 1.00±0.15 | 50±0.5 | 23-43 |
Φ50.0 | 51.00±0.50 | ≤25.00 | 1.00±0.15 | 50±0.5 | 26-48 |
Note: Custom specifications are available upon request.